Spark Plug Question
07-07-06, 10:55 PM
#1
Full Member
Thread Starter
Join Date: Feb 2006
Location: Massachusetts
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
Spark Plug Question
Well I just went out and bought parts for my first tune up with a rotary engine and about ten minutes after I bought them my friend told me, who does not own an RX-7 btw, that there are two different types of plugs needed for the engine, longer plugs that go on the top and shorter plugs that go on the bottom. Is this true and do I have to get new plugs? These are the plugs btw plugs
tank?
tank?
07-07-06, 11:14 PM
#2
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
Funny the Picture Doesn't look at all like the Platinums...the 7's and 9's do not have an electrode stickin out from the Bottom of the Plug.The Outer Bottom of the plug is basically the ground Electrode,And the center is a Little bit recessed in the Middle...I Sent you off a PM RJPBBOI..and gave you a little info on the Plugs/with location and Part #'s For NGK..Good Luck..Misterstyx69
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM