anyone know how to rig the stock sliders to mount a sparco seat to them? esp the passenger side since its offset...

so if anyone made custom brackets please let me know how and what was needed...or if you bought sparco brackets, let me know where and how long it took. ive read it can take as long as 2 months to get brackets from sparco.

 

i just custom made mine i took a 3 inch wide bout 1/4 inch thick piece of metal and measured off where the brackets needed to be and welded the sliders to it drilled holes in the metal and bolt them to the seat them, bolt the sliders back to the original holes in the floorboard

 

Definitely check the archives for Sparco or Recaro (sp?) since I've since posts about this topic there.

 

I used my stock brackets. What I had to do was drill new holes on the brackets to mount the seats. On the passenger side. Use the stock mounting holes towards the center of the car and drill new holes for the outer rail. Thats how I mounted mine, worked great.

 

What about using the stock brackets on the drivers side? any mods for that to mount?

 

hmmmm.... im confused.... im trying to mount sparco torinos in my fc, and it doesnt seem like you could use more than one stock hole... since the distances on each stock slider are different as well as the distance between each slider.... any help would rock.... cause damn.... stumped