2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Some quick engine Q's

Old Apr 15, 2006 | 12:02 PM
  #1  
Rotary_Knight's Avatar
Thread Starter
Senior Member
Tenured Member: 20 Years
iTrader: (4)
 
Joined: Jun 2004
Posts: 727
Likes: 2
From: California
Some quick engine Q's

Ok I've had some minor idling issue when my car is cold, and it's been hard to take the time actually sit down and check it out. So, before I tear away I wanna hear some pointers or maybe you guys can lead me in a certain direction.

My car: 1989 GTU with new motor that has about 6k miles on it right now.

Only when the car is cold the idle will fluctuate sometimes. If I start it up it will do the normal 3k start up then drop down like it should. Everything seems fine until I drive off and start cruising. Then when I come to a stop sign a put it in nuetral to start braking, the engine will almost cut out unless I give it some gas right before it dies. It will keep doing this until it warms up and when it's warm everything is fine.

There's no smoke or anything from the exhaust and I know for a fact this motor internally is good. I think it's probly one of the accessories I brought over from my old motor.

I still need to get injectors cleaned, and I also think maybe it could be the BAC valve. Any good suggestions will be helpful. So, I can finally set this thing right, but the motor is great and has not given me any issues beside this very minor one.
Reply
Old Apr 15, 2006 | 12:08 PM
  #2  
liv's Avatar
liv
New User
Tenured Member 10 Years
 
Joined: Oct 2005
Posts: 507
Likes: 0
From: Kansas City
set the tps

and search
Reply
Old Apr 15, 2006 | 01:10 PM
  #3  
hanman's Avatar
Rotary Freak
Tenured Member 20 Years
 
Joined: May 2001
Posts: 1,779
Likes: 0
From: Peoria, IL
set the thermowax too
Reply
Old Apr 16, 2006 | 10:41 AM
  #4  
Rotary_Knight's Avatar
Thread Starter
Senior Member
Tenured Member: 20 Years
iTrader: (4)
 
Joined: Jun 2004
Posts: 727
Likes: 2
From: California
oh man I knew someone would tell me to search. Well, thanks for the inputs anyone else got anymore? I'm not sure if it's the tps cause when it's warm it's perfectly fine just when it's cold. It did this on my previous motor too but then that one blew up.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
stickmantijuana
Microtech
30
Apr 23, 2016 06:37 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:16 PM.