Solid Corner Seals
#2
Original Gangster/Rotary!
iTrader: (213)
I just installed a set on a customer's motor and didn't like them. Typically I use mazda oem parts (to include 3mm corner seals) but the customer supplied these. The grooves in two of them were a bit offset from center, and required additional clearancing.
Note that they weren't in an atkins bag, so i'm going off what the customer told me. They definitely werent oem mazda, and didn't have one smooth face like the stock parts. They also were supposedly a couple of years old, so maybe they've changed some things since then.....
Note that they weren't in an atkins bag, so i'm going off what the customer told me. They definitely werent oem mazda, and didn't have one smooth face like the stock parts. They also were supposedly a couple of years old, so maybe they've changed some things since then.....
#4
rotors excite me
iTrader: (16)
I heard from another member that the soft seals inside the corner seals were Mazda's attempt to reduce chatter in the 12A's. That may or may not be an issue with the 13B's, or may not even be the truth, just putting that out there. I will probably use solid corner seals in my rebuild I'm working on now, as I personally don't see any reason not to.
Thread
Thread Starter
Forum
Replies
Last Post