2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

slight misfire at 4k and above..PLEASE HELP

Thread Tools
 
Search this Thread
 
Old 03-01-11, 01:17 PM
  #1  
88 7

Thread Starter
 
djweej's Avatar
 
Join Date: Jun 2008
Location: woodbridge
Posts: 37
Likes: 0
Received 0 Likes on 0 Posts
slight misfire at 4k and above..PLEASE HELP

mainly to happen in 3rd at 4000 rpms. 1st gear has no power i believe to be starting at 3000rpms. and when doing 55 5th gear sucks for bauging down on me. injectors issue? i have had vacuum issues so could a switched vacuum line do it?

88-na-

thanks guys,
jeremy
Old 03-01-11, 01:51 PM
  #2  
S5 T2
iTrader: (6)
 
Bamato's Avatar
 
Join Date: Jun 2010
Location: Mesa, AZ
Posts: 948
Likes: 0
Received 0 Likes on 0 Posts
Could be a few things. Could be a bad ECU ground/secondary injector problems. Could be port issues. I'm no much use with the port control on an NA car, so someone else will have to chime in on that one.
Old 03-01-11, 02:49 PM
  #3  
Sharp Claws

iTrader: (30)
 
RotaryEvolution's Avatar
 
Join Date: Oct 2003
Location: Central Florida
Posts: 5,107
Likes: 0
Received 41 Likes on 40 Posts
3-4k RPMs is the injector staging area, where the fuel system integrity is the most important.

check fuel pressure at idle and at the 3-4k RPM area where the issue occurs, if it is low check the voltage at the pump(black/white wire to the top of the pump housing)
replace the fuel filter
clean and service the injectors
clean and re-ground the engine(the main injector ground circuit junction is at the rear rotor housing bolted to the housing itself). make sure the ground at the starter bolt and the one on top of the transmission bellhousing are solid and clean as well.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM
23Racer
Canadian Forum
13
11-25-18 04:44 PM
Robrods64
New Member RX-7 Technical
6
10-02-15 07:56 PM
Turblown
Single Turbo RX-7's
1
09-30-15 05:58 PM



Quick Reply: slight misfire at 4k and above..PLEASE HELP



All times are GMT -5. The time now is 08:48 AM.