Siemens 850 Injectors Fitting Problem
#1
Senior Member
Thread Starter
Join Date: Apr 2005
Location: HOLLYWOOD, FL
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
Siemens 850 Injectors Fitting Problem
Well i got my 850 injectors, only problem is that they dont come with the o ring notch and also the upper grommet of the inector is too big so they dont fit all the way in. The grommet itself is rubber but its unremovable unless i cut it :/ Im not sure how injectors are put together and was really just wondering if i can cut some of the attached rubber grommet off my injector.
Last edited by Hellkat; 03-18-06 at 11:01 PM.
#3
Former Moderator. RIP Icemark.
sound like the wrong injectors...
you should need to modify the injectors to make them work. Get the right injectors for the car.
and cutting O rings and sealing rubber is a bad idea... they will never be leak free if you have to cut them
you should need to modify the injectors to make them work. Get the right injectors for the car.
and cutting O rings and sealing rubber is a bad idea... they will never be leak free if you have to cut them
#4
Senior Member
Thread Starter
Join Date: Apr 2005
Location: HOLLYWOOD, FL
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
well idiot me did research and they actually do fit, they drop perfect into intake mainfold with 5/8 rubber hose as gasket and 2 11 mm o rings make em fit into fuel rail/
Thread
Thread Starter
Forum
Replies
Last Post
imitek
3rd Generation Specific (1993-2002)
9
08-28-15 05:28 PM