I'm look for a replacement bushing for a short shifter thats goes in the ball in the middle of the shifter. The bushing that "mazdatrix" sells is for the stock shifter.


the black bushing is whats needed.
<img src="http://www.negative-camber.org/crispyrx7/fc/ssfulcrum.jpg" />

 

Who made your shifter? I would bet they would know.

 

Your kit looks like a Chinese "Miata" shifter kit...the stock S5 bushing should work.
The stock piece at the top looks like a S4, which didn't use a bushing at all, AFAIK.

 

it is... I didn't realized there's a s4 and s5 shifter. Like I said the stock bushing on mazdatrix doesn't fit. I bought the shifter on ebay. Come on, it was cheap. I should try to make one.

 

try the 89-91 bushing at mazdatrix.
here./.look, http://www.mazdatrix.com/g4.htm about half way down.