Does anyone know the serial # of the Greddy 720 injectors?

Thanks

 

19550-0830?? I think thats it.....wait no these are denso.

 

greddys are densos but i dont remember the part number

 

Yea, I was sold "Greddy 720cc injectors", but just wanted to confirm that Denso 19550-0830 injectors are the Greddy ones.

Thanks

 

If the injector is paint black with a light blue plug part its a greddy/denso.

 

that # isnt to a 720cc injector
http://www.witchhunter.com/FlowDataPix/d1955000830.jpg

 

that is the correct number, I was dealing with them last week. Black case with blue top.

 

I got 720 secondaries and they are black with a darker blue top. I drove my truck today and I'm at work so I can't go get the part number off of them right now.

 

i dont know much about the color im just looking for a set my self and found that site so i could track them down by the part umber .. had a guy offer this number as 720cc and this chart shows them as 690cc.. maby this chart is wrong

 

1.8 ohms - that's high impedence right?

 

no that would be low high is like 12-13 and I think low is 2-3, something like that

 

The 195500-0830's flow anywhere from 680 - 740 cc's on the bench. They are probably sold as 720's. I have rarely found a set that flows close to each other.
It seems that most all large (600's or larger) top-feeds flow very differently.
The Denso side-feeds almost always flow as rated if clean and not damaged.

Just my observations from testing injectors 7 days a week.
Gordon
WitchHunter Performance

 

where did you buy them and which should I get for my T2?

 

I remember reading somewhere that greddy 720s actually flow around 680-700cc but they label them as 720 because of increased fuel flow from upgraded fuel pumps.
http://www.prostreetonline.com/buy/b...eed_injectors/ This website says it.

Sidenote: This website has greddy 720s for $95
http://www.alamomotorsports.com/prod...m/blowout.html

 

second link is dead....thanks for the link.....so I need top feed, high Impedance?

 

Nobody has been able to find 720cc top feed high impedence. Every 720 I have seen on the market is low impedence. Just get the resistors.

Try the link again I edited it.

 

should I search for it or can you explain it to me? Link works....109 bux for the 720cc's

 

wow cool to see the guy from witchhunter here! I'm seding my injectors to your place next time since you are on the boards!

 

Search for 720 and itll scroll you down 1/4 down the page its on super specials $95

 

Just got in an low miles set of the 195500-0830's yesterday and they both flowed 752cc's at 43.5 psi, (first time we've seen two match).
I will probably change the rating of this injector on our site to 720cc, as it is about the average of the many sets that we have tested.

Gordon
WitchHunter Performance

 

hey thats for coming back and letting us know what the flow rate was..

 

I haven't done the research so I don't know if you guys get them at all...

The 12a Turbo motors came with these injectors (some versions anyway). In Australia, on the forums this is what we advertise them as!

A set went for $50 per injector the other day (approx USD$40). Much cheaper, however second hand.

Tim.

 

Anyone order from them before? 190.00 for two 720 cc injectors.. free shipping

 

I'd like to believe those are mine (sent mine with my 550's)!

 

so there are no such thing as hi impedence 720s?? and where can i find the resistors?