S5 na tps and bac into S4 TII?
12-20-05, 08:29 PM
#1
We are the D
Thread Starter
Join Date: Nov 2005
Location: Indianapolis
Posts: 492
Likes: 0
Received 0 Likes
on
0 Posts
S5 na tps and bac into S4 TII?
would the TPS and BAC valve off of an S5 NA work with an S4 Turbo II? Theres one in a junkyard and i might as well pick them up while im there snagging those taillights. thanks in advance
12-21-05, 09:49 AM
#4
Former Moderator. RIP Icemark.
The plugs are different on both the TPS and the BAC from S4 to S5 models.
So you could use the S5 parts, you would just have to modify the plugs.
As far as the TPS, you would only use the full range TPS (the S5 versions have two).
On the BAC valve you would also have to loosen the screw that holdss the elbow, and turn the elbow to the proper angle to fit on the Turbo.
And your bump has been deleted. Bumps, TTT, Anybodies, etc are forbidden here in the 2nd gen technical section.
So you could use the S5 parts, you would just have to modify the plugs.
As far as the TPS, you would only use the full range TPS (the S5 versions have two).
On the BAC valve you would also have to loosen the screw that holdss the elbow, and turn the elbow to the proper angle to fit on the Turbo.
And your bump has been deleted. Bumps, TTT, Anybodies, etc are forbidden here in the 2nd gen technical section.
Thread
Thread Starter
Forum
Replies
Last Post