Any chance anyone could scan one for me and email it yes its random lol

Im looking to turbo my S5 n/a and i have an S5 TII intake manifold and need to port it too fit i just want to see how far off the holes will be

Thanks

 

Getting scale right will be quite a bit of a nightmare.

 

If you're going to use this method, make sure that whomever scans it for you also scans some reference shape/size, so you can scale it appropriately when you print it out, i.e: Scan it along side one of those clear rulers so you can print it out and size it to scale..

It shouldn't be THAT hard, just make sure you have a reference, first.

 

does that manifold gasket go like this?. /--\ sort of thing?..If so I have one I will never use.
My advice is to make your Own gasket.Get some gasket material from Partsource and Slap it on top of the holes and tap it lightly with a ball peen hammer.it will leave indentations of the manifold on the gasket material.then just Cut it.Done!.(I have made all my gaskets,including exhaust.saved a shitload of money).

 

Im not sure how the S5 n/a intake manifold gasket looks but im not worried about scale i just need to scale till it fits the bolt pattern because i know those are the same for n/a and TII

I went to partsource to order a gasket they dont have it in there system

 

Send me a pic of the manifold,That you need a gasket for.(mistertstyx69@hotmail.com)

 

Dude... Just take the old gasket off your engine... And port! But seriously they can be had everywhere. Go on ebay. I have a metal gasket laying around. But no scanner. lol