hey guys.. i've been searching for this type of add-on for some times now.. and i've come to no luck on finding who makes these add-on's... there's a picture below... i would like to know who makes these, and where can i get some.?? thanks guys..

1990_whitecomet

 

Isn't that the factory S5 turbo lip? like $170 some or more for it too? Someone posted about it a short time ago, maybe two weeks or so.

 

i don't know.. is it the stock s5 t2 lip.?? i guess someone had it posted before i did huh!.. ahhaa.. hUumm.. i've look at forum pages, 1-20.. and nothing.. still does anyone know where i can get one.. or at least some info of one.?

1990_whitecomet

 

No, thats not a stock S5 TII lip at all.

 

https://www.rx7club.com/showthread.p...ront+lip+stock


It looks like it to me.

 

The stocker is what is on my car. IT IS NOT a stock lip. For sure.

That car looks nice. Crazy japanese...

 

so yea, it is NOT the stock s5t2 then!.. but another aftermarket add-on maker, but just not the stock s5t2 version.. still can anyone identify that front lip.? it just doesn't seem to be the stock s5 lip...

1990_whitecomet

 

http://www.demonspeed.com/splitter2.htm

 

That lip is also NOT the demonspeed splitter. That used to be MY black car he has up on his page, that he uses to rip people off with. NO ONE should buy from this guy.

That lip that the original poster asked about is nothing I have ever seen before, and I've been around for a while now looking at this stuff. It must be japanese.

 

i really dont like the look of that lip. and it would never look right unless you had all that other body stuff to go with it.

 

those deep dish rims are beautiful though......

 

im just asking if you guys knew/know who the maker was and if known maybe i can get some infomation of that lip.. of course its a japanese, thats why its called "JapaneseSuperCars".. im pretty sure that the maker is not from the us, but still want some info. if anyone knows.. thanks..

1990_whitecomet

 

Is it the feed lip?

 

The Feed lip his little wide oval holes on the bottom part of the lip on each side.

 

feed lip, available at rotaryextreme:

 

mazdaspeed lip also at RE, sort of similar:

 

It's a feed lip without the holes...was available in the version everyones farmiliar with and that style without the holes.

 

IF it is, it is made thicker/taller, look at the difference:

 

like I said different version...that would explain why there are no holes either righhht? LOL

 

so it seems that its the feed lips, but just the holes covered up.? or do you guys think.?

1990_whitecomet

 

Well, I have never seen any documentation of that silver lip anywhere in the 6 years I've been browsing for parts on the internet. The feed lip with the holes was the first lip I ever decided I wanted for my own car, but I never got it due to lack of availability.

All I'm saying is that if it's "another version" of a feed lip, it's one I've never seen documented with any of the "regular" feed lips for sale or pictured in any gallery.

I don't think you'll have much luck finding it, but good luck.

Personally I think the silver lip looks like ***, but that's just me. The feed lip (with the holes) is just bad as hell though. Wormiez did make feed copies for $300 shipped, which is a damn good deal.

 

feed lip with the holes covered no doubt at all....you photoshop the lips with the holes covered you get the exact same deal....

 

I don't think so. Look at the sides. The lip with the circles had a body line that goes from the bottom of the front edge, to the top of the rear edge. The silver lip, has a body line parallel to the ground...not the same.

See the opening for the center of the bumper grill? On the lip with the circles, this opening extends on the lip forward, to a point almost. Maybe 1/2" max thickness there. On teh silver lip...look, it is way thicker, say 1-2". Not teh same.

Perhaps they were both made by feed at one time, but they are not the same thing, with/without the circles.

 

"odula" or something like that I think

 

well, scott is right. at least this seems closer to it...