S5 dash into S4 Questions
#1
Rotary Apprentice
Thread Starter
Join Date: Jan 2005
Location: USA
Posts: 2,181
Likes: 0
Received 0 Likes
on
0 Posts
S5 dash into S4 Questions
Basically, i got ahold of a free S5 black dash to replace my maroon-turned-brown dash and I'm wondering what the easiest way to swap it will be. Should I just rip out all of the electronics from the S5 and swap the 'shell' of the dash since I'm doing this for cosmetic purposes only?
Also, the S5 has a different redline for the N/A's if im not mistaken (if they're both manual)? so could i take that guage cluster? are there any other series differences i should be aware of if i decide to switch anything else like the wiper motor or turn signal or cruise control or something? thanks in advance
Also, the S5 has a different redline for the N/A's if im not mistaken (if they're both manual)? so could i take that guage cluster? are there any other series differences i should be aware of if i decide to switch anything else like the wiper motor or turn signal or cruise control or something? thanks in advance
#2
I
iTrader: (6)
basicly the easyest way is to just swap the coloured dash board it self , and reuse all the old electronics from the s4.
you can swap a s5 gauge cluster into your car fairly easily, there will be some rewiring required as the wires that plug into the back of hte cluster are in different locations. there is a write up on it somewhere if you search for the conversion.
you can swap a s5 gauge cluster into your car fairly easily, there will be some rewiring required as the wires that plug into the back of hte cluster are in different locations. there is a write up on it somewhere if you search for the conversion.
#4
I
iTrader: (6)
well i found it searching on the internet instead of the forum search feature lol...
this is for swaping a s5 na 5sp gauge cluster into a 5sp s4 na
https://www.rx7club.com/2nd-gen-archive-72/gauge-cluster-swap-pins-again-s4-wires-s5-cluster-285724/
here is a write up by icemark
no pictures but ohh well... basicly it looks like you need to move all the wires around to fit the list he wrote
this is for swaping a s5 na 5sp gauge cluster into a 5sp s4 na
https://www.rx7club.com/2nd-gen-archive-72/gauge-cluster-swap-pins-again-s4-wires-s5-cluster-285724/
here is a write up by icemark
no pictures but ohh well... basicly it looks like you need to move all the wires around to fit the list he wrote
Thread
Thread Starter
Forum
Replies
Last Post
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM