S4 T2, What coils to use?
#1
S4 T2, What coils to use?
I tried searching, but i havent really found the info i needed. I've got a Microtech Lt8 and s4 t2 motor im currently swaping the engine into a 1st gen. My question is, What aftermarket coils do you guys run, and how many for trailing/leading?
On my other 1st gen, i've got two Blaster 2 coils on leading and one for trailing, so i wanted to find out whats recommended for a t2.
On my other 1st gen, i've got two Blaster 2 coils on leading and one for trailing, so i wanted to find out whats recommended for a t2.
#5
Lives on the Forum
Yes, the LTX8 has a built-in ignitor, but the LT8 doesn't.
You have the LT8, right?
The LT8 can fire the stock coils, becuase the stock coils have the ignitior built into the base of each coil pack.
If you get aftermarket coils, they will most likely be just coils - no ignitors. Therefore, the LT8 cannot fire these aftermarket coils directly. If you wire the aftermarket coils through the stock ignitiors (bases), then it'll work.
-Ted
You have the LT8, right?
The LT8 can fire the stock coils, becuase the stock coils have the ignitior built into the base of each coil pack.
If you get aftermarket coils, they will most likely be just coils - no ignitors. Therefore, the LT8 cannot fire these aftermarket coils directly. If you wire the aftermarket coils through the stock ignitiors (bases), then it'll work.
-Ted
Thread
Thread Starter
Forum
Replies
Last Post
killerrx710
Adaptronic Engine Mgmt - AUS
5
09-28-15 09:13 AM
killerrx710
2nd Generation Specific (1986-1992)
1
09-24-15 10:57 PM