s4 or s4 front Iron
Thread Starter
Locust of the apocalypse
Joined: Apr 2003
Posts: 2,553
Likes: 2
From: Directly above the center of the earth (York, PA)
s4 or s4 front Iron
My s4 front Iron Housing is shot in the ***... Need a new housing...
Can get an S5....
I'm not using the OMP and am planning on doing a street port anyway so the port differences shouldn't matter...
What other problems would there be to using an s5 front cover on an s4 motor????
Can get an S5....
I'm not using the OMP and am planning on doing a street port anyway so the port differences shouldn't matter...
What other problems would there be to using an s5 front cover on an s4 motor????
Joined: Oct 2003
Posts: 11,576
Likes: 27
From: Morristown, TN (east of Knoxville)
The front iron has nothing to do with the OMP, that is the front COVER that determines that.
The port inlet diameter is the only difference between the two, that and the o-ring casting for the oil passage.
The port inlet diameter is the only difference between the two, that and the o-ring casting for the oil passage.
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
20B Forum
8
Aug 18, 2015 02:46 PM
