2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

S4 no start issue. no power

Thread Tools
 
Search this Thread
 
Old Nov 23, 2010 | 05:26 PM
  #1  
englishtom1596's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jan 2010
Posts: 48
Likes: 0
From: Kzoo
S4 no start issue. no power

i just replace my trans and did the block off plates for the air pump, EGR and cold start. everything is plugged back in and i dont see anything ive missed no matter how many times i check.

Now after putting my (charged) battery back in i have nothing, no power to anything when i turn the key, no click from starter, no windows, absolutely nothing except the headlights work, brake lights work dash lights work. thats it.

anyone have any ideas to what it could be please give me some ideas
Reply
Old Nov 23, 2010 | 08:09 PM
  #2  
satch's Avatar
Moderator
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Jun 2005
Posts: 11,738
Likes: 16
From: tulsa,ok.
Check that you have voltage going to the Main fuse in the engine fuse box on the battery side via a Black wire, and if so then verify that you have voltage coming out of this fuse on the fire wall side via a Black wire. It's possible that the Main fuse is blown among other things.
Reply
Old Dec 2, 2010 | 05:58 PM
  #3  
englishtom1596's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jan 2010
Posts: 48
Likes: 0
From: Kzoo
thanks thats exactly what it was. the black wire grounding for the whole fuse box.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Queppa
New Member RX-7 Technical
11
Nov 18, 2024 03:47 AM
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM
befarrer
2nd Generation Specific (1986-1992)
4
Aug 14, 2015 04:18 PM




All times are GMT -5. The time now is 01:58 AM.