Rx7 Vert Headlight Switch
08-07-08, 08:57 PM
#1
Junior Member
Thread Starter
Join Date: Jan 2008
Location: Appomattox
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Rx7 Vert Headlight Switch
I just wired up my new radio on my 88 Vert and now whenever i cut my headlights on with the radio running i fry the headlight switch ive ruined two switches now and have no idea wtf is going on. Any helpful advice would be awesome
08-07-08, 09:05 PM
#2
Junior Member
Thread Starter
Join Date: Jan 2008
Location: Appomattox
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
For the radio i used all the stock connections and have the headrest speaker power wire hooked up to the remote wire (headrest speakers dont work i think its the amp Speakers are good)
08-07-08, 09:58 PM
#4
The Blue Blur
Join Date: Dec 2006
Location: Virginia
Posts: 716
Likes: 0
Received 0 Likes
on
0 Posts
That sounds exactly right, the ground wire should go to a good grounded bolt on the body, NOT the illumination wire.
From the sticky at the top of the second gen section;
From the sticky at the top of the second gen section;
Originally Posted by Icemark
Ground to the body, use the 10mm bolt behind the center console front drivers access panel. Do not use the Red/Black as ground it will damage the interior light circuit and dimmer in the car
08-08-08, 08:12 PM
#5
Junior Member
Thread Starter
Join Date: Jan 2008
Location: Appomattox
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
sweet all day today i was thinking that wire i used for a ground was the problem cause i remembered seeing a wiring diagram that showed it running off to some sort of light system... thanks for the help
Thread
Thread Starter
Forum
Replies
Last Post
