RX 8 wheels on an FC
#1
Junior Member
Thread Starter
Join Date: Aug 2002
Location: Kitchener Ontario
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
RX 8 wheels on an FC
Hi, I was wondering whether anyone had tried to use the new wheels off of an RX 8 on their FC with stock set up.
They are 18 x 8 with a 50 mm offset.
Will they fit ?
Please advise if you have and with what tire size.
Thank you
Paul
They are 18 x 8 with a 50 mm offset.
Will they fit ?
Please advise if you have and with what tire size.
Thank you
Paul
#2
Lives on the Forum
No, they do not fit.
The RX-8 runs the same width as the FD - 8.0".
There are numerous threads about fitting FD wheels on an FC.
The same applies to the RX-8 wheels.
Basically you need like a 1" spacer up front.
The rears fit fine.
Also, if it isn't obvious, you need 5-bolt hubs.
The bolt pattern is 5 x 114.3mm, so this doesn't fit on 4-lug FC's.
-Ted
The RX-8 runs the same width as the FD - 8.0".
There are numerous threads about fitting FD wheels on an FC.
The same applies to the RX-8 wheels.
Basically you need like a 1" spacer up front.
The rears fit fine.
Also, if it isn't obvious, you need 5-bolt hubs.
The bolt pattern is 5 x 114.3mm, so this doesn't fit on 4-lug FC's.
-Ted
#4
Junior Member
Thread Starter
Join Date: Aug 2002
Location: Kitchener Ontario
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
RX-8 wheels
Thanks to both of you guys for the reply. Great picture.
My FC came stock with 5 bolt hubs on 15 in ch rims. Just want to get some new rims this year.
Thanks again Paul
My FC came stock with 5 bolt hubs on 15 in ch rims. Just want to get some new rims this year.
Thanks again Paul
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM