OK guys i know this has been covered but when i search it only states that people have done it and it helped but not how u do it, my only question is which part of the fuel up system are u rewiring. Are you redoing the wires that are in the tank, or the wires that run from the front of the car to the pump???? Can someone do like a quick breakdown of how this is done please, and how exactly do i test mine to see if its getting proper voltage cause theres like 3 or 4 wires on top???


Please help me out here guys...

Thanx alot

 

I'll sum it up real quick for you.

 

Here's another. First hit on Google for "rx-7 fuel pump rewire":

http://www.1300cc.com/howto/how2/rewire.htm

 

Thanx guys, i didnt think to google it!

 

Ok i went out to test the fuel pump, well i cranked the car and got out the multimeter and put the positive on the black wire with the white stripe and grounded the negative end and i was getting right at 10 volts at idle constant, is that normal, is there anything else to check????

 

Go for a ride with the meter and see if it jumps up when your in boost to over 12vdc during boost.