replacing worn out tumblers in the ignition...
Thread Starter
Wanna play with my Wankel
Joined: Oct 2006
Posts: 378
Likes: 0
From: york PA
replacing worn out tumblers in the ignition...
From what I found in the SEARCH feature, I cannot replace the tumblers themselves, but will have to chisel out the security bolts and yank the whole assembly...Am I correct on this? TIA
Jeff
Jeff
HOT DOGS! 8======D
Joined: Jul 2007
Posts: 173
Likes: 0
From: Columbia, MO
Goes *round*round*round*
Joined: Apr 2003
Posts: 718
Likes: 0
From: San Antonio
BTW, you don't have to chisel off the security bolts. Just take off the gauge surround/gauges (you might have to anyways, I don't remember) and get a good pair of locking visegrips on them and turn.
Thread Starter
Wanna play with my Wankel
Joined: Oct 2006
Posts: 378
Likes: 0
From: york PA
Ah, I just used my dremmel and cut some slots and wammo, I unscrewed them out. took about 20 minutes to take it from the parts car to the DD. Now my tumblers are nice and tight.
Thread
Thread Starter
Forum
Replies
Last Post
t-von
3rd Generation Specific (1993-2002)
9
Sep 10, 2015 01:56 PM
BLK 93
3rd Generation Specific (1993-2002)
11
Sep 9, 2015 10:56 AM
rx8volks
Canadian Forum
0
Sep 1, 2015 10:46 PM
