2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Replacing Thermostat, 182 or 192 Deg?

Thread Tools
 
Search this Thread
 
Old Apr 3, 2004 | 08:03 PM
  #1  
83/86Rx7's Avatar
Thread Starter
Burner
Tenured Member 15 Years
iTrader: (2)
 
Joined: Jan 2004
Posts: 147
Likes: 0
From: PA - Not to far from Philly
Replacing Thermostat, 182 or 192 Deg?

Gonna be replaceing my Thermostat for my '86 Sport. Parts store lists two thermostat's, one that's 182 degrees, the other that's 192. I belive I remember reading S4's thermostat's opened at 190, which would mean I'd need the 192, but I'm not 100% sure I'm right either. Any info would be great.
Reply
Old Apr 3, 2004 | 08:55 PM
  #2  
drago86's Avatar
Rotary Enthusiast
Tenured Member 10 Years
 
Joined: Oct 2002
Posts: 1,165
Likes: 0
From: California, Bay Area
182, all the stock stats were switched to this round the time the 3rd gen came out. Also, general forum wisdom is that anything besides the mazda stat could cost you a motor..
Reply
Old Apr 4, 2004 | 06:00 PM
  #3  
NZConvertible's Avatar
I'm a boost creep...
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 15,608
Likes: 8
From: Auckland, New Zealand
As per the 88 and 89 FSM's, the stock FC thermostat starts to open at 180degF.
Reply
Old Apr 4, 2004 | 07:40 PM
  #4  
Full Member
Tenured Member 05 Years
 
Joined: Nov 2003
Posts: 67
Likes: 0
From: Silverdale, WA
play it safe and buy the thermostat from a mazda dealership.
Reply
Old Apr 4, 2004 | 09:25 PM
  #5  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
only use a Mazda thermostat in the car... DO NOT USE A STANT
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BLK 93
3rd Generation Specific (1993-2002)
11
Sep 9, 2015 10:56 AM
Frox
General Rotary Tech Support
2
Sep 8, 2015 08:36 AM
Enzo1944
New Member RX-7 Technical
2
Sep 6, 2015 08:57 AM




All times are GMT -5. The time now is 06:52 PM.