i am replacing the injectors in my 10ae. real bad hot start prob. which o-rings etc do i need to replace when i do this? anything else i should do while im in there fpr gaskets etc? please get back to me asap i am going to pick the car up tommorow. if you can im me @ moxeysrx7@aol.com. tia

 

i also want to make sure the 88 t2 (10th anniv) injectors are high impedence.

 

You need upper and lower grommets as well as an o-ring for each.

http://www.mazdatrix.com/c-6.htm

 

cool. thanks alot