TyFc3s

ok ive been serching for alittle bit now and all i can find is stuf for fd rear seats (for some strange reason) im in the process of striping my cars interior (feel free to comment on that) and i have no idea how to get the back seats out i would be very grateful if some one could please tell me how to do this.

incubuseva

iTrader: (13)

It's pretty easy. The mounting brackets on the shock tower come out w 2 bolts each. The rear seat should have hinges on the edges of the seat. I cant remember specifically about those but I'm sure there are more bolts there. That part should be straight forward.

As far as the seat part itself, the very bottom carpet comes over those plastic pieces. Just move the carpet to the side + it should come off, then the seat base (where you sit) is held in the front bottom (where your thighs would sit) by some hooks. Push down + towards the rear of the car they should come out. I believe there are 2 or 3 of these. That's all I can remember, but I think that's it.

OH, be careful when taking these out - you can sell them in the FS section here for a few hundred if they're in good condition with all the hardware

TyFc3s

thanks and they are in pretty good condition so thanks for that too