remove mainafold
#1
remove mainafold
Hi
I have a 1987 rx7 turbo and i am wonding how i removie my mainafold i have bin haveing problams with my car. Like it will not start at all. I uset to start right up and its a brand new engine i dont think i have driven it more than 200 miles. and its crapt out on me :-( so i have bin told to remove the mainafold and check all my vacume lines whell i have a new admission rack to put on it. But i can get under the mainafold so if someone know how to take off the throttle body and the mainafold and possably the intake please let me know ok thanks.
I have a 1987 rx7 turbo and i am wonding how i removie my mainafold i have bin haveing problams with my car. Like it will not start at all. I uset to start right up and its a brand new engine i dont think i have driven it more than 200 miles. and its crapt out on me :-( so i have bin told to remove the mainafold and check all my vacume lines whell i have a new admission rack to put on it. But i can get under the mainafold so if someone know how to take off the throttle body and the mainafold and possably the intake please let me know ok thanks.
#2
Seduced by the DARK SIDE
Join Date: Apr 2001
Location: Orange Park FL (near Jax)
Posts: 7,323
Likes: 0
Received 2 Likes
on
2 Posts
Almost everything you need to know is in the Factory Service Manual.
Some old time forum members scanned it to PDF.
I have a mirror site of the files.
You may download & print whatever you need.
The link is in my sig below.
Some old time forum members scanned it to PDF.
I have a mirror site of the files.
You may download & print whatever you need.
The link is in my sig below.
#3
Banned. I got OWNED!!!
Ummm, it would be easier to help you if you actually used somewhat right spelling for the terms...
Anyways......
There's 4 nuts and 1 bolt holding it on to the LIM (Lower Intake "Manifold"). Just take those out and disconnect everything holding it down and pull it up. By everything holding it down I mean the vacuum, fuel, coolant lines, throttle cable, and electrical connections.
Anyways......
There's 4 nuts and 1 bolt holding it on to the LIM (Lower Intake "Manifold"). Just take those out and disconnect everything holding it down and pull it up. By everything holding it down I mean the vacuum, fuel, coolant lines, throttle cable, and electrical connections.
Thread
Thread Starter
Forum
Replies
Last Post
Erosangel
3rd Generation Specific (1993-2002)
5
09-18-15 04:06 PM