Regarding hardware for the S5 lip
07-24-04, 10:58 PM
#1
White Comet
Thread Starter
Join Date: Jan 2002
Location: Orange County
Posts: 2,145
Likes: 0
Received 0 Likes
on
0 Posts
Regarding hardware for the S5 lip
I've been using the S5 lip for sometime and am having trouble getting it to line up as it should.
The front hangs a little lower then it should and I feel this may be partly due to not having all the screws for the front of the lip.
Recently I noticed these bolts/screws are the same as the ones which hold the underbody panel in place. Can anyone confirm/deny this? If so, it'll make it easier to aquire. Thanks
The front hangs a little lower then it should and I feel this may be partly due to not having all the screws for the front of the lip.
Recently I noticed these bolts/screws are the same as the ones which hold the underbody panel in place. Can anyone confirm/deny this? If so, it'll make it easier to aquire. Thanks
07-24-04, 11:11 PM
#2
It's been a while since I had the front lip off, but all the bolts across the lip are the same. I think the lip bolts are the same threads as the underpan, but they are longer. I'll be up in the garage tomorrow morning at which time I will look at them if you don't have an answer.