Recipes to pass smog in Cali.
#1
Rotary Freak
Thread Starter
Join Date: Mar 2001
Location: LA.,California USA
Posts: 1,611
Likes: 0
Received 0 Likes
on
0 Posts
Recipes to pass smog in Cali.
For a 2nd gen TII with E6K, To4B, FMIC, bigger secondary injectors, pulled off all emission stuff. I heard people passing smog with a vette electric air pump.
Besides going thru the trouble of putting all the emission stuff back can i run the vette pump and a high flow cat alone? What else is needed to pass the test. I know visual will be hard to come by.
Besides going thru the trouble of putting all the emission stuff back can i run the vette pump and a high flow cat alone? What else is needed to pass the test. I know visual will be hard to come by.
#2
SOLD THE RX-7!
Join Date: Mar 2001
Location: Vancouver, BC, Canada
Posts: 7,451
Likes: 0
Received 0 Likes
on
0 Posts
you won't pass a visual at all...
but the vette pump will get you through the pipes test. just run the vette pump straight to the cat.
here is an install write up.
http://www.cabrio7.org/mods/airpump/airpump.html
personaly I don't like that ACV hook up though. cause my test is on a roller and over 2500rpm. I'd rather just have a switch and turn it on a few mins before they start testing. you can't leave the pump on for more then 10 mins or so at a time as it'll burn out. the vette ecu turned it on and off for short times.
but the vette pump will get you through the pipes test. just run the vette pump straight to the cat.
here is an install write up.
http://www.cabrio7.org/mods/airpump/airpump.html
personaly I don't like that ACV hook up though. cause my test is on a roller and over 2500rpm. I'd rather just have a switch and turn it on a few mins before they start testing. you can't leave the pump on for more then 10 mins or so at a time as it'll burn out. the vette ecu turned it on and off for short times.
Thread
Thread Starter
Forum
Replies
Last Post