hkp

iTrader: (2)

i know these numbers are out there somewhere but i have 56k and i have a.d.d. not a good combo when trying to open that adobe link. i need series 4 turbo apex seals, fd corner seal springs, s4 turbo gasket set, s4 oil control rings. please give me the part numbers to these items if you have them, my stealership didnt even know how to spell apex seal, i wish someone in there knew something about a rotary engine. if i could order them and get them by saturday for sure i would do it but i have to get this back together on sunday.

RETed

Guess you don't search much...

You can hit the Mazdatrix website to get all of those part numbers.
Just switch the numbers around...

I've got most of them here...
http://fc3spro.com/TECH/REBUILD/rparts.html


-Ted

hkp

iTrader: (2)

thanks ted, i searched and got a thread with lots of stuff but it was adobe and after waiting 20 minutes for it to load i gave up and made this so someone as smart as you would guide me, i know its the lazy way but it works. thanks again, i doubt i will ever be able to help you with a rotary problem but if you ever need help with blindfolded one handed masturbation while standing in a hammock, i can guide with many years of experience.

evileagle

iTrader: (1)

Heh. I dunno if you're gonna rebuild a motor if your ADD is so bad that you can't view a PDF.


And I've got some bad news about Ted. You probably found the person on this forum that's the least likely to hold your hand.

hkp

iTrader: (2)

dont get the wrong impression, im just joking, tried searching, didnt find much. i cant sit around for the 4 hours a night and search for part numbers, i have kids and only get about 3.5 hours from when i get home to when they go to bed. i made the post after i put the last one to bed in hopes of getting somewhere fast. thanks for the help, next time i'll try a little harder before i ask for help. the a.d.d. thing was a joke but i do have dial up. my mechanical abilities are up to par for the task of a rebuilding my engine. now that i've cried like a little bitch on the net, im going to call legend mazda and order some parts so i can this thing off my friends garage this sunday. maybe i'll post some pics when i get done, after the haltech is tuned with my bigger injectors and hybrid im hoping for a moddest 350 rwhp. my tuner just made 604 at 30lbs with afr's in the 10's, still some fine tuning but ran out of c16.

HAILERS

Download in the middle of the night, while you sleep, and save to disk.

hkp

iTrader: (2)

i guess i will try that, thats usually when i defrag though.