rear End swaping ? Turbo II to gtu N/A
#2
I break Diff mounts
iTrader: (1)
Well you will need to make a custom driveshaft and need the halfshafts from the TII.
I've heard you can use a Auto Vert driveshaft and just extend it a couple inches and it will work.
Not sure about the halfhshafts but I would assume that oif your doin the rear end why not upgrade to beefier halfshafts.
I've heard you can use a Auto Vert driveshaft and just extend it a couple inches and it will work.
Not sure about the halfhshafts but I would assume that oif your doin the rear end why not upgrade to beefier halfshafts.
#3
Full Member
Thread Starter
Join Date: Nov 2001
Location: california
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
Hey, thx.
I know about the driveshaft, I'm using a T5 anyway so I will have a make a new drive shat, if you can clarify about the halfshaft it will be great.
I know about the driveshaft, I'm using a T5 anyway so I will have a make a new drive shat, if you can clarify about the halfshaft it will be great.
#5
We come with the Hardcore
iTrader: (2)
Join Date: Nov 2001
Location: Springfield, MO
Posts: 2,456
Likes: 0
Received 0 Likes
on
0 Posts
Let me get this straight... you're putting a GTU rear into a TII? or a TII rear into a GTU?
As per what's needed, if you were to unbolt the driveshaft from a stock TII/GTU, and drop it, THAT is everything that is needed.
As per what's needed, if you were to unbolt the driveshaft from a stock TII/GTU, and drop it, THAT is everything that is needed.
Thread
Thread Starter
Forum
Replies
Last Post
josef 91 vert
2nd Generation Specific (1986-1992)
23
09-03-15 11:20 AM