SBCFC

I'm putting all new bushings in my FC and i'm only having a problem with the bushings on the rear trailing arms, or "C" arms, it's the smaller bushing, the package the bushings came out of said they were for my year ect but they are too big i pressed the old bushing out and the new bushing is buldgeing out and won't compress how it should, My car is an 87, has any body else had this problem?

YaNi

iTrader: (2)

Did you remove the metal sleeve that the bushings are encased in?

SBCFC

--------------------------------------------------------------------------------

Also, what size sway bar is on the 87 base model stock? i have 24mm bushings for it but they are way too big, do they offer bushings for the smaller bar?

SBCFC

i can't remember, it didn't look like one was there, i'll have to look better

mike_merryguy

iTrader: (8)

the rear sway should be 14 mm i think and the front is the 24mm
mazdatrix has the bushings, or kragen, autozone probably

SBCFC

yeah i'm an idiot the metal sleeve is still in, and i have new bushings for the front bar but they are to big, my car is an 87 base model if that helps, it's got to be smaller than 24mm