RB SS brake line install help
#1
Senior Member
Thread Starter
Join Date: Jul 2001
Location: Parma, MI
Posts: 412
Likes: 0
Received 0 Likes
on
0 Posts
RB SS brake line install help
I got the racing beat stainless brake lines for my 87 T2. How do I know which is front and rear and how do I put the line holder things on the front? No instructions whatsoever.
#2
The front ones will be straight lines with AN connectors on the front (if I remember correctly). The rear ones are the ones with the O Shaped Terminal on them.
The front holder has a clip that keeps the line tight against the mount. Remove that clip by sliding it with a screwdriver or something, and the line will come right out.
With my experience, the RB lines were too bid to fit in the stock mounting holes, and I had to file the mount a bit to widen the space.
The front holder has a clip that keeps the line tight against the mount. Remove that clip by sliding it with a screwdriver or something, and the line will come right out.
With my experience, the RB lines were too bid to fit in the stock mounting holes, and I had to file the mount a bit to widen the space.
Thread
Thread Starter
Forum
Replies
Last Post
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM