I was installing the springs and shocks last night and noticed that when i took the tension off the springs from the compressors i could slightly rotate the spring in the shock perch. There wasn't a lot of play in rotating the spring but compared to the stock setup it has me a little paranoid (I know the stock springs are about an inch taller than the RB springs).

Just want to make sure there isn't a problem or there is something else i need to do, and that I'm only being super-paranoid.

 

That's fairly normal for lowering springs. We actually didn't even need the spring compressor to put the front springs back on when we did the suspension on my friend's 240 - we could just put the upper spring mount on, and bolt it down.

-=Russ=-