Radio wiring harness?
#1
Damnit, steel doors hurt!
Thread Starter
Join Date: Apr 2003
Location: Charlotte, NC
Posts: 788
Likes: 0
Received 0 Likes
on
0 Posts
Radio wiring harness?
Ok well i officialy have to say that the pervious owner of my RX-7 is a complete dumbass!!
Well while looking at somethings I decided to check out the radio stuff. Theres no radio but I did find a good set of CW speakers under the dash havn't checked the back yet. But one that i did know was that the pervious owner hacked up the stock harness and then I guess decided to rewire the car with house eletircal wires. and there was a house switch were the radio is supposed to be?!
Well What I want to know is, does anyone know which wire is which on the radio harness? I manly just need constant power, illumination and acc power?
Well while looking at somethings I decided to check out the radio stuff. Theres no radio but I did find a good set of CW speakers under the dash havn't checked the back yet. But one that i did know was that the pervious owner hacked up the stock harness and then I guess decided to rewire the car with house eletircal wires. and there was a house switch were the radio is supposed to be?!
Well What I want to know is, does anyone know which wire is which on the radio harness? I manly just need constant power, illumination and acc power?
#2
Rabbit hole specialist
iTrader: (11)
Your profile says you have a 90, so the wiring should be the same as my 91:
12V switched power - blue/white
Constant power - blue/red
Illumination is red/black
Don't take my word for it though. I'd double check the wiring diagrams which can be found in the FSM at www.fc3s.org under How-Tos.
12V switched power - blue/white
Constant power - blue/red
Illumination is red/black
Don't take my word for it though. I'd double check the wiring diagrams which can be found in the FSM at www.fc3s.org under How-Tos.
#3
Damnit, steel doors hurt!
Thread Starter
Join Date: Apr 2003
Location: Charlotte, NC
Posts: 788
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, i will have to check out that page i forgot all about it. I would have looked in my manual but the electricall wiring part is missing.