I have recently bought a 88 vert and the head unit was missing I bought one and I want to but it in it is a stock head unit and some of the connectors were cut on the car wiring side could anyone help me identify witch wires go where to each connector I’ve been trying to find a picture or something to help but I have not been able to find anything as I know right now there is a blue connector that is missing that is of what I know at the moment I’m not sure of anything else I also believe the cassette part of the radio is not functioning correctly I was reading on other posts and the belts seem to be a common issue could it also be somthing to do with the gears being unaligned? Also is there anywhere I can still buy the belts for the radio Any help would be appreciated I can add pictures if needed just ask

 

Found this link, hopefully it helps.

https://www.rx7club.com/2nd-generati...7/#post5131072
What are the wire colors for adding aftermarket radio
LTBlue/Red= 12v+
LtBlue/White= +Accessory
LtBlue/Yellow= -power ant trigger
Red/Black=+ Lumination
White=Factory Amp Turn on

Ground to the body, use the 10mm bolt behind the center console front drivers access panel. Do not use the Red/Black as ground it will damage the interior light circuit and dimmer in the car

Front Speakers (maximum of a 15 watt peak from the radio):
LtGreen/Red= Left
LtGreen/Black= Left

LtGreen= Right
LtGreen/Yellow=Right

Rear Speakers (if applicable, if you have the amplified rear speakers again the Maximum of 15 watts peak is all the stock speaker amp input can handle):
Brown= Left rear
Brown/White= Left Rear

LtBlue= Right Rear
LtBlue/Orange=Right Rear