A radical twist on the ATF trick! MORE=BETTER (if done right)
I had 200,000 miles of carbon, so bad that the intake and rotors were coated in about 1/16th inch of the stuff!
ACK!
I AM NOT RIPPING THIS THING APART.
But at the same time, I dont want it in there!!!
I figger about two weeks of soaking should do it...
FILL'ER UP!
3 quarts later.....
ACK!
I AM NOT RIPPING THIS THING APART.
But at the same time, I dont want it in there!!!
I figger about two weeks of soaking should do it...
FILL'ER UP!
3 quarts later.....
In two weeks ill pump the excess ATF out of the engine with a pump, remove the plugs, and exhaust downpipe.
Then ill put a tray under the car and rotate the engine to get the rest out.
Hopefully this will unfreeze my FROZEN CLOSED 6 ports too!
Then ill re-assemble, wait for everyone to go inside and POOF!
make the neighboring houses dissapear for about 5 minutes.
I LOVE THIS LIQUID!
-Always tinkering......
Sniper_X
Then ill put a tray under the car and rotate the engine to get the rest out.
Hopefully this will unfreeze my FROZEN CLOSED 6 ports too!
Then ill re-assemble, wait for everyone to go inside and POOF!
make the neighboring houses dissapear for about 5 minutes.
I LOVE THIS LIQUID!
-Always tinkering......
Sniper_X
good luck...
after twenty four hour, the neighbors thought my car was on fire, plus i had just installed my bonez dp and cat pipe, so it was the first time they heard the real sound of a rotary. Let us know how it works.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
rotor_veux
2nd Generation Specific (1986-1992)
3
Sep 28, 2015 09:25 PM




