Raced Tonight NEW! Best E.T
#1
Laying Down Rotary Law
Thread Starter
Raced Tonight NEW! Best E.T
Hey Guys went to the track again tonight
did 2 passes
1st 14.1@100
SECOND!!:::::::
R/T. .619
60' ..2.142
330..5.893
1/8...8.951
MPH...81.19
1000..11.572
1/4...13.788
MPH..101.92
===============
88 GXL ///Turbo II Motor
N/A Tranny and Rear
Stock autozone clutch
HKS Filter
3" Inch Exhaust running into a single Ultra-Flow Muffler.
NO OTHER MODS whats so ever
Not even a Turbo II Hood
for the stock TII Intercooler which sits ontop of the motor
did 2 passes
1st 14.1@100
SECOND!!:::::::
R/T. .619
60' ..2.142
330..5.893
1/8...8.951
MPH...81.19
1000..11.572
1/4...13.788
MPH..101.92
===============
88 GXL ///Turbo II Motor
N/A Tranny and Rear
Stock autozone clutch
HKS Filter
3" Inch Exhaust running into a single Ultra-Flow Muffler.
NO OTHER MODS whats so ever
Not even a Turbo II Hood
for the stock TII Intercooler which sits ontop of the motor
Last edited by kabooski; 10-03-01 at 09:31 PM.
#2
Full Member
Join Date: Feb 2001
Location: Pompano Beach, FL
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Good going
Hey man thats a nice run you had...one question how much boost where you running I know that with a 3" exhaust that stock wastegate cant keep up with the boost.
#4
Full Member
Join Date: Mar 2001
Location: Greensboro, NC
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
How's your drivetrain holding up? I want to turbo my car eventually, what sensors/harnesses did you have to change, ECU? What about underhood heat, aren't you worried about that defeating the purpose of the intercooler?
Thanks,
Thanks,
#6
Rotary Enthusiast
Join Date: Feb 2001
Location: Right Here!
Posts: 898
Likes: 0
Received 0 Likes
on
0 Posts
That is almost identical to my best run!
I did lose power at the top of 3rd. this run, or I would have been around 13.5 @ 102 or 103 MPH.
Going out this weekend to see if I can top that!
I did lose power at the top of 3rd. this run, or I would have been around 13.5 @ 102 or 103 MPH.
Going out this weekend to see if I can top that!
Thread
Thread Starter
Forum
Replies
Last Post
rx8volks
Canadian Forum
0
09-01-15 10:46 PM