Quick question about rim fitting
05-12-04, 12:45 AM
#1
Full Member
Thread Starter
Join Date: Aug 2003
Location: Vancouver
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
Quick question about rim fitting
Would a series 4 fit rx8 rims
225/45/18 on 18s offset is 50 i believe
any ideas on how to make it fit or if it will fit at all...
thanks
225/45/18 on 18s offset is 50 i believe
any ideas on how to make it fit or if it will fit at all...
thanks
05-12-04, 03:50 PM
#2
Eats, Sleeps, Dreams Rotary
iTrader: (1)
Join Date: Jun 2001
Location: London, Ontario, Canada
Posts: 3,106
Likes: 0
Received 0 Likes
on
0 Posts
If the offset is 50mm then you may need some wheel spacers to push the rim out like people use who put on FD rims.
To determine if the diameter is correct, use a tire calculator:
http://www.rx7turboturbo.com/robrobi...e_diameter.htm
It says the stock RX-8 rubber should be 26" in diameter while the stock FC rubber eg. TII tires 205/55/16 is 24.9".
To determine if the diameter is correct, use a tire calculator:
http://www.rx7turboturbo.com/robrobi...e_diameter.htm
It says the stock RX-8 rubber should be 26" in diameter while the stock FC rubber eg. TII tires 205/55/16 is 24.9".
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM