question on buying used fuel injectors
07-10-02, 09:07 PM
#1
Rotary Enthusiast
Thread Starter
question on buying used fuel injectors
i i heard that if injectors are stored the wrong way then they will drie out or soemthing and go bad. is there any truth to this or is there anything i need to lokk for when buying used injectors?
07-11-02, 11:15 AM
#3
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
Any used injector should be cleaned professionally before installation in your car, so it really doesn't matter. But yes, if injectors are stored improperly they can be damaged from contaminates. Also, the rubber seals will dry out. But this usually doesn't happen, and those rubber seals should ALWAYS be replaced when you install injectors.
07-11-02, 11:30 AM
#4
Full Member
Join Date: Nov 2001
Location: Melbourne, FL
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
Don't buy old used injectors!
If your old ones are shot, and you are looking for inexpensive, reliable replacements, check out this place, and give them a call.
http://www.fuelparts.com/
They sell Python remanufactured injectors cheap. They are fully tested, and come with all new pintle caps and O-rings.
If you buy a used set you pay $$ for the set, then have to send them out to be cleand and balanced for $$ each, and then you have to buy new O-rings and pintle caps (if the cleaning place does not give them to you). So why waste the time and money, when you can get Python remanufactured ones that are even warrantied for a year.
This is just one place that sells new and remanufacuted injectors, if you do a search on here you will find a bunch of other places to price up too.
Later,
If your old ones are shot, and you are looking for inexpensive, reliable replacements, check out this place, and give them a call.
http://www.fuelparts.com/
They sell Python remanufactured injectors cheap. They are fully tested, and come with all new pintle caps and O-rings.
If you buy a used set you pay $$ for the set, then have to send them out to be cleand and balanced for $$ each, and then you have to buy new O-rings and pintle caps (if the cleaning place does not give them to you). So why waste the time and money, when you can get Python remanufactured ones that are even warrantied for a year.
This is just one place that sells new and remanufacuted injectors, if you do a search on here you will find a bunch of other places to price up too.
Later,
Last edited by Salguod; 07-11-02 at 11:42 AM.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
86rxNa
2nd Generation Specific (1986-1992)
2
08-11-15 11:51 AM
