2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

question about popping noise and flames

Thread Tools
 
Search this Thread
 
Old May 11, 2004 | 07:25 PM
  #1  
cwsttu's Avatar
Thread Starter
1.3L is not that small
Tenured Member 05 Years
 
Joined: Apr 2002
Posts: 1,470
Likes: 1
From: Nacogdoches Tx
question about popping noise and flames

ok i did the TB mod but left the dashpot in place... when i get on the gas hard i hear popping noises... the popping happens when i am high rev and engage the clutch to shift and get on the gas again... it happens during that split second... is this my car trying to throw flames? i have gutted the cat the best i could but might not have gotten all of it.. otherwise its a stock exhaust... i removed the dashpot today and it seemed to help it do this as i thought it would... any ideas?

btw: HOW exactly do you throw flames? a friend a long time ago said to rev high and then just barely touch the gas but this is not working for me... are there any other ways?
Reply
Old May 11, 2004 | 07:27 PM
  #2  
beefhole's Avatar
Boosted. I got BLOWN!!!
Tenured Member: 20 Years
iTrader: (29)
 
Joined: Sep 2003
Posts: 3,742
Likes: 1
From: Queens, NY
This is perfectly normal. Your car is backfiring. Mine is bone stock and I can hear it pop at high rpm shifting.
Reply
Old May 11, 2004 | 07:28 PM
  #3  
CyborgRyu's Avatar
Drift FC
Tenured Member 10 Years
iTrader: (8)
 
Joined: Nov 2003
Posts: 1,602
Likes: 1
From: Cincinnati, OH
usually happens when your car is running rich, nothing to worry about except that you're wasting gas.
Reply
Old May 11, 2004 | 07:33 PM
  #4  
Sideways7's Avatar
Lives on the Forum
Tenured Member: 20 Years
Liked
iTrader: (7)
 
Joined: Dec 2003
Posts: 6,598
Likes: 10
From: Temple, Texas (Central)
In order to get flames, you usually have to get rid of the ACV and other emmisions stuff. Mazda put several things on the car to keep afterburn, as they call it, from happening, so they usually need to be removed if you want flames.
Reply
Old May 11, 2004 | 07:36 PM
  #5  
cwsttu's Avatar
Thread Starter
1.3L is not that small
Tenured Member 05 Years
 
Joined: Apr 2002
Posts: 1,470
Likes: 1
From: Nacogdoches Tx
my ACV and air pump is removed and the cats gutted... for the most part.. however thats the only emmision stuff i have removed
Reply
Old May 11, 2004 | 08:03 PM
  #6  
Sam's Avatar
Sam
big boost baby
Tenured Member 05 Years
 
Joined: Jun 2003
Posts: 269
Likes: 0
From: Okinawa, Japan
I made some pretty good flames with all my emmissions equipment still on, with test pipe exhaust and some cheap fartpipes. On a old 87 SE.
Reply
Old May 11, 2004 | 08:05 PM
  #7  
Sideways7's Avatar
Lives on the Forum
Tenured Member: 20 Years
Liked
iTrader: (7)
 
Joined: Dec 2003
Posts: 6,598
Likes: 10
From: Temple, Texas (Central)
hmmm, did you gut all the cats, or just the main? also, what exactly does the dashpot do?
Reply
Old May 11, 2004 | 08:32 PM
  #8  
rx7_rat's Avatar
Junior Member
Tenured Member 05 Years
 
Joined: Feb 2004
Posts: 30
Likes: 0
From: VA
the dashpot slows the throttle plates from snapping closed to help bac, or idle air control to slowly bring the rpms to the the correct idle, and to help from stalling


rat
Reply
Old May 11, 2004 | 09:17 PM
  #9  
ddub's Avatar
i am legendary
Tenured Member 05 Years
 
Joined: Sep 2003
Posts: 8,478
Likes: 1
From: Kirkland, WA
I find it funny that I have removed every piece of emissions equipment, did the full TB mod (took off everything including the dashpot), running an RB header to straight pipe to dual mufflers, ported intake manifolds, and have a TII fuel pump and I get NO flames. Haha, I'm actually kinda happy about that tho

On another note, I get popping (backfiring) too, but it's no big deal.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
Mar 15, 2022 12:04 PM
_Tones_
Adaptronic Engine Mgmt - AUS
10
May 25, 2021 05:37 AM
gxl90rx7
Haltech Forum
4
Sep 14, 2015 03:09 PM
Nosferatu
2nd Generation Specific (1986-1992)
7
Sep 5, 2015 02:13 PM
83revival
New Member RX-7 Technical
4
Sep 3, 2015 10:42 PM




All times are GMT -5. The time now is 03:04 AM.