putting s5 motor in 87 TII
#1
Junior Member
Thread Starter
Join Date: May 2002
Location: Butler, PA
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
putting s5 motor in 87 TII
I was wondering what all needs to be swapped to put a series 5 motor in my 87 TII. I can only get my hands on a s5 motor and I'm very pressed for time. I have read other posts on this subject, but they were really vague. I would imagine if I were to take the s4 intake and the injectors and such that it should work, correct? I need to do this swap in a week, so any information, especially detailed, will be much appreciated. Thanks in advance.
#2
SOLD THE RX-7!
Join Date: Mar 2001
Location: Vancouver, BC, Canada
Posts: 7,451
Likes: 0
Received 0 Likes
on
0 Posts
if you want the oil metering pump to work. you need to swap the front cover and pump from the S4 to S5.
then use everything that is bolted to the S4, and bolt it to the S5. except the S5 exhuast manifold and turbo. use that.
so intake manifolds, fuel rails, injectors, vac rack and lines, use all S4 sensors.
then use everything that is bolted to the S4, and bolt it to the S5. except the S5 exhuast manifold and turbo. use that.
so intake manifolds, fuel rails, injectors, vac rack and lines, use all S4 sensors.
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
08-11-15 03:47 PM