Putting a s4 tranny on a s5 engine

Reply Subscribe

Thread Tools

Search this Thread

Oct 25, 2011 | 10:04 PM

The Wildchild

Thread Starter

Senior Member

iTrader: (1)

Joined: Aug 2009

Posts: 277

Likes: 0

From: Healy AK

Putting a s4 tranny on a s5 engine

Do all you need to do is match the same series flywheel as tranny?

Oct 25, 2011 | 10:26 PM

MIDNFauciUSN

Roll FIS green

iTrader: (8)

Joined: Mar 2003

Posts: 1,738

Likes: 14

From: Jax, FL

I BELIEVE you don't even have to do that.... Just minor wiring mods actually...

Oct 25, 2011 | 10:53 PM

Derekcat

Rotary Zealot!

iTrader: (8)

Joined: Jun 2004

Posts: 1,736

Likes: 2

From: Milwaukie, Or

MIDNFauciUSN >> Yep! The engine/flywheel have to match, the transmission only has to be NA or Turbo-matching the engine. [But make sure you have the correct crossmember and Y-bracket for your transmission!]

Oct 26, 2011 | 11:29 AM

farberio

NASA-MW ST4

iTrader: (7)

Joined: Dec 2004

Posts: 3,800

Likes: 3

From: Norcal, Bay Area

Quote:

Originally Posted by The Wildchild

Do all you need to do is match the same series flywheel as tranny?

The flywheel series must match the engine. (S4 to S4) (S5 to S5)

The flywheel type must match the transmission. (TII to TII) (N/A to N/A)

The transmission crossmember must match the transmission series. (S4 to S4) (S5 to S5)

Oct 26, 2011 | 12:03 PM

87 t-66

not a drifter

iTrader: (133)

Joined: Jun 2004

Posts: 9,337

Likes: 6

From: Columbus, Ohio

Quote:

Originally Posted by farberio

the flywheel series must match the engine. (s4 to s4) (s5 to s5)

the flywheel type must match the transmission. (tii to tii) (n/a to n/a)

the transmission crossmember must match the transmission series. (s4 to s4) (s5 to s5)