problems with rats nest removal
02-23-03, 09:57 AM
#1
Senior Member
Thread Starter
Join Date: Dec 2001
Location: Longmont, Co
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
problems with rats nest removal
well, the rats nest is gone (S5 TII), but after staring at vacuum and fuel diagrams I'm left with a few lines that I know should be attached somewhere. The ones i'm confused on is the line from the charcoal canister, the nipple on the center housing, and the small tube on the oil fill neck. where should they go?
02-23-03, 10:15 AM
#2
Senior Member
Join Date: Apr 2001
Location: Darien CT
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
not sure if it's the same as the s4 but on mine i removed the charcoal canister. the nipple on the center housing was plumbed into the check valve on the tid and the small tube on the oil filler is capped off
02-23-03, 10:34 AM
#3
stop stealing my avatar
Join Date: Apr 2002
Location: Canton MI
Posts: 825
Likes: 0
Received 0 Likes
on
0 Posts
I would just take off the charchole canister. Some people say your car will smell like gas when it's parked, but mine doesn't smell at all.
As for the line on the oil filler neck you can block it off or leave it open. Just make sure you don't block off the "crank case" vent line too. You must leave atleast one line open, or your car will smoke like crazy.
As for the line on the oil filler neck you can block it off or leave it open. Just make sure you don't block off the "crank case" vent line too. You must leave atleast one line open, or your car will smoke like crazy.
Thread
Thread Starter
Forum
Replies
Last Post
Devon300zx
2nd Generation Specific (1986-1992)
15
09-16-15 06:57 AM
