primary injector harness plugged in the right place? picture provided
Thread Starter
Full Member
Joined: Jul 2009
Posts: 144
Likes: 0
From: hawaii
primary injector harness plugged in the right place? picture provided
i have a S5 NA. can someone please look at the picture and tell me if i have the right harness plug connected to the correct primary injector. thanks in advance
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
Put the wires on the underside of the fuel rail.
And really you can mix up those wires and still run OK as the primaries fire at the same time.BUT if you want to get technical about it then look up posts by Satch as he replied with wire colors to the injectors many times.
I run Haltech so I can't tell you the stock colors,sorry.
And really you can mix up those wires and still run OK as the primaries fire at the same time.BUT if you want to get technical about it then look up posts by Satch as he replied with wire colors to the injectors many times.
I run Haltech so I can't tell you the stock colors,sorry.
they don't fire at the same time but the fact that they aren't direct injection then the phasing will probably not even be noticable even if you switched them around, so it doesn't matter much if they get inadvertantly swapped. i would however be a little concerned about the broken locking clips, these injector clips do not like to stay put without them.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM