2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

pretty sure this is my starter but give me your opinion...

Thread Tools
 
Search this Thread
 
Old Oct 29, 2007 | 01:52 PM
  #1  
slow_2ed_gen's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Jun 2005
Posts: 624
Likes: 1
From: fort myers beach, FL
pretty sure this is my starter but give me your opinion...

well last night i went to start my car and it cranked then it all the sudden haulted to a stop. i tried to restart it and it just makes a strong clicking noise and it wont crank the engine at all, i keep trying and a couple times i hear like a soft spinning noise almost like a loud fuel pump but coming from the starter. i tried to push start it but when i pop the clutch out the back tires just lock up. i jacked it up and tried hitting the starter with a hammer and it didnt change anything and i checked the wires there all attached correctly and fine.

so... what i'm thinking is the starter is stuck engaged to the flywheel and its not letting the flywheel move. so i guess i need to replace the starter, i'm just kinda double checking what i'm thinking so let me know if i'm right or something else to check

thanks

-dan
Reply
Old Oct 29, 2007 | 02:37 PM
  #2  
texFCturboII's Avatar
version 2.0
Tenured Member 15 Years
iTrader: (17)
 
Joined: Mar 2007
Posts: 3,596
Likes: 2
From: Fort Worth, TX
you've checked the battery yes?
Reply
Old Oct 29, 2007 | 03:00 PM
  #3  
RoughRex's Avatar
It's Radiation Therapy
Tenured Member 15 Years
 
Joined: Nov 2005
Posts: 902
Likes: 0
From: Nashville, TN
Sounds like the engine is locked up to me... carbon lock or a stuck apex seal. if it were the starter it wouldn't crank and then come to a sudden stop. The loud click you hear is probably the bendix kicking out on the starter and the spinning noise is it trying to turn. Try removing all the accessory belts, put it in N and turn the engine backward by hand. That or maybe the clutch hydraulics have failed and you are trying to start it in gear... seems less likely to me because it stopped turning suddenly.
Reply
Old Oct 29, 2007 | 04:32 PM
  #4  
slow_2ed_gen's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Jun 2005
Posts: 624
Likes: 1
From: fort myers beach, FL
well its cranked and stopped a couple times before then it just started back up fine. is there no way it can be what i was saying with the starter
Reply
Old Oct 29, 2007 | 06:23 PM
  #5  
slow_2ed_gen's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Jun 2005
Posts: 624
Likes: 1
From: fort myers beach, FL
well i bought a starter earlier this afternoon and just put a new starter on it and it did the exact same thing. so i guess its locked up, wow this is really lame to my rx7

is there anything i can do?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
msilvia
3rd Generation Specific (1993-2002)
28
Apr 14, 2016 12:58 PM
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM
rx7shirley
2nd Generation Specific (1986-1992)
6
Sep 2, 2015 02:11 PM
ray green
1st Gen General Discussion
2
Sep 2, 2015 06:35 AM
befarrer
2nd Generation Specific (1986-1992)
4
Aug 14, 2015 04:18 PM




All times are GMT -5. The time now is 06:00 AM.