Power windows Qs, please advise
Thread Starter
Junior Member
Joined: Aug 2006
Posts: 38
Likes: 0
From: South Wales
Power windows Qs, please advise
I have installed an alarm system recently and it gives me an extra option to close the windows, but its a negative wire only.
Can i tap it to the power window motor wire (Go up), and makes it close when i activate my alarm?
Where is the location of the motor? Which wire do i tap into (please state the colour)? Thanks
Can i tap it to the power window motor wire (Go up), and makes it close when i activate my alarm?
Where is the location of the motor? Which wire do i tap into (please state the colour)? Thanks
Former Moderator. RIP Icemark.
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
You would have to use relays.
The factory power window system is a high current positive voltage trigger. A grounding trigger would not work to roll windows up or down (without adding relays).
The factory power window system is a high current positive voltage trigger. A grounding trigger would not work to roll windows up or down (without adding relays).
Last edited by Icemark; Aug 29, 2006 at 04:00 PM.