2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Power windows

Thread Tools
 
Search this Thread
 
Old Oct 31, 2001 | 12:43 AM
  #1  
PSIGOD's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Oct 2001
Posts: 108
Likes: 0
From: Louisville Ky
Power windows

Do the RX-7's (86-91) have problems with the power windows? It seems that i have to repair both windows. How much (once i get the parts) would it cost me to get a mechanic to fix this for me?
Reply
Old Oct 31, 2001 | 09:52 AM
  #2  
1FastT2's Avatar
Rotary Freak
Tenured Member 20 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 1,790
Likes: 0
From: Sinking Spring Pa.
My power windows suck they always are nery slow and sometimes dont go up all the way, I can't imagine they would be cheap to have fixed. If they dont work all together it may be the power window switch itself.
Reply
Old Oct 31, 2001 | 10:40 AM
  #3  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
yeah the switch is the most common problem, but if it is the motor and regulator for the window, it could be over $500 a window, for parts and labor for a mechanic to fix it.

I would be checking the switch and ground first, to make sure it is sending out 12volts.

And frankly I would be very reluctant to have any mechanic work on my windows or electrical. Generally they only know how to fix by replacing, rather than what the real problem is.
Reply
Old Oct 31, 2001 | 10:50 AM
  #4  
MikeL's Avatar
Senior Member
Tenured Member 15 Years
 
Joined: Feb 2001
Posts: 441
Likes: 1
From: Baton Rouge, LA USA
What's going on with the windows?

If they won't work then you probably need to clean the switches that are in the arm rest. Almost zero cost.

If they are slow, you probably need to clean and lubricate the "chain of *****" that are in the lower part of the door. Almost zero cost.

Mike
Reply




All times are GMT -5. The time now is 05:45 PM.