plans for 88 rx7
10-16-04, 06:36 PM
#1
affen
Thread Starter
Join Date: Sep 2004
Location: Tucson, AZ
Posts: 913
Likes: 0
Received 0 Likes
on
0 Posts
plans for 88 rx7
Ok, my rx7 is a 88 turbo model. It sat for awhile infront of my grandmas house and she wanted it out of the way so I took it off her hands. 
Ok so on with the teardown. weeeeeeee 
The paint is gold or WAS gold before it faded, badly. So basically the paint looks like crap. lol There is a rather large tear on the driver side seat and little ones on the passenger side. I already have some friends that said they would help take out the carpet and stuff like that.
Now for the fun part, building it back up.
I already have some mods planned...
NGK platinum spark plugs for 86-91 $44
NGK plug wires for 86-91 $45
Vacuum hose upgrade kit for 86-91 (blue) $98
Koyo radiator for 86-88 $325
Walbro high flow fuel pump $110
Bonez 2.5” Turboflow system for 86-88 $369
Re-upholster seats $350
Repaint (subaru blue) $????
BNR stage 3 turbo upgrade $725
HKS fmic for 86-88 $1800
No I'm not doing them all at once. I also want to replace the PD w/ a banjo bolt. I want to remove the omp and run premix, I haven't been able to track down a block off plate though... The list is growing. Any input would be appreciated.
Ok so on with the teardown. weeeeeeee The paint is gold or WAS gold before it faded, badly. So basically the paint looks like crap. lol There is a rather large tear on the driver side seat and little ones on the passenger side. I already have some friends that said they would help take out the carpet and stuff like that.
Now for the fun part, building it back up.
I already have some mods planned...NGK platinum spark plugs for 86-91 $44
NGK plug wires for 86-91 $45
Vacuum hose upgrade kit for 86-91 (blue) $98
Koyo radiator for 86-88 $325
Walbro high flow fuel pump $110
Bonez 2.5” Turboflow system for 86-88 $369
Re-upholster seats $350
Repaint (subaru blue) $????
BNR stage 3 turbo upgrade $725
HKS fmic for 86-88 $1800
No I'm not doing them all at once. I also want to replace the PD w/ a banjo bolt. I want to remove the omp and run premix, I haven't been able to track down a block off plate though... The list is growing.
Any input would be appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
Azevedo
Other Engine Conversions - non V-8
26
03-01-19 09:19 PM
