Pineapple Racing 6 port sleeve insert information
#1
Audio Cronic Syndrome
Thread Starter
Join Date: Nov 2003
Location: Anacortes, WA Hometown: P.O., WA
Posts: 890
Likes: 0
Received 0 Likes
on
0 Posts
Pineapple Racing 6 port sleeve insert information
So who has had this done to their NA? How much difference between before upgrade and after? Any current problems with them coming out if having them installed by PR themselves? Anyone got a set willing to sell?
#2
I've done it.
I can't say if they make a difference or not, since the 6th ports were frozen solid before the rebuild, but it pulls nicely from 5k on up with them open.
The trick is to really secure them well. I used locktite plus a good solid ding in the edge of the sleeve where it meets the ramp, other people screw them in from the back (drill a hole, use a small self tapping screw).
Installed, but not secured:
-=Russ=-
I can't say if they make a difference or not, since the 6th ports were frozen solid before the rebuild, but it pulls nicely from 5k on up with them open.
The trick is to really secure them well. I used locktite plus a good solid ding in the edge of the sleeve where it meets the ramp, other people screw them in from the back (drill a hole, use a small self tapping screw).
Installed, but not secured:
-=Russ=-
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM