Pic's of my new Turbo!
#1
Senior Member
Thread Starter
Join Date: Oct 2001
Location: dallas,texas
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
Pic's of my new Turbo!
OK guys here are some pics of the turbo and custom manifold made by Don Marvel of http://www.marvelspeed.com
BTW its a 60-1 Turbo and will be going on my TII this weekend!
BTW its a 60-1 Turbo and will be going on my TII this weekend!
#5
Rotary Freak
iTrader: (1)
Join Date: Feb 2001
Location: Sinking Spring Pa.
Posts: 1,790
Likes: 0
Received 0 Likes
on
0 Posts
Is that a 4" inlet? Looks kinda small comparing it to the outlet. My 60-1 looks a little bigger. Other than that, have fun, and be careful my back end like to swing out pretty easily.
#6
Senior Member
Thread Starter
Join Date: Oct 2001
Location: dallas,texas
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
I think that was 2500 bling bling.
The inlet is 4 1/2 I believe...I wanted a little less turbo lag
1FastT2
Looks like our setup are almost identicle. I also have a greddy FMIC, but I have a 90 motor with a street port...check my sig
The inlet is 4 1/2 I believe...I wanted a little less turbo lag
1FastT2
Looks like our setup are almost identicle. I also have a greddy FMIC, but I have a 90 motor with a street port...check my sig
#7
Super Raterhater
iTrader: (6)
Join Date: Dec 2001
Location: NY, MA, MI, OR, TX, and now LA or AZ!
Posts: 10,625
Likes: 0
Received 2 Likes
on
2 Posts
That's not a hybrid is it? I've never been very good with the turbo's as far as identifying them/understanding them much. What's the need for the custom manifold? I've got so many questions, and not much understanding!
Trending Topics
#8
Senior Member
Thread Starter
Join Date: Oct 2001
Location: dallas,texas
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
No thats a real deal 60-1.
You can buy pre-made manifolds for the turbo...but Don Marvel told me that his custom manifold flows way better than the aftermarket manifolds out there. Plus it was about the same price.
I didn't take any pics of the Tial Wastegate...sorry.
I will be sure to post pic's of it when its all installed!
Haltech is going on soon...so I won't be boosting over 6-7 psi until I get the haltech
You can buy pre-made manifolds for the turbo...but Don Marvel told me that his custom manifold flows way better than the aftermarket manifolds out there. Plus it was about the same price.
I didn't take any pics of the Tial Wastegate...sorry.
I will be sure to post pic's of it when its all installed!
Haltech is going on soon...so I won't be boosting over 6-7 psi until I get the haltech
#9
Super Raterhater
iTrader: (6)
Join Date: Dec 2001
Location: NY, MA, MI, OR, TX, and now LA or AZ!
Posts: 10,625
Likes: 0
Received 2 Likes
on
2 Posts
Ahh, I figured that since that housing(I believe?) looked pretty damn big compared to the stock Which thusly explains the aftermarket manifold since it won't bolt to the stock! Alright, making sense now! Is that outlet on the bottom of the manifold for the wastegate, or am I totally off?
#12
Senior Member
Thread Starter
Join Date: Oct 2001
Location: dallas,texas
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
The overall setup is actually cheaper than buying a kit and this is including installation.
The kits are nice...but in my opinion way over prices. The amount I paid for all of this is way cheaper than a kit and has a way better turbo.
The kits are nice...but in my opinion way over prices. The amount I paid for all of this is way cheaper than a kit and has a way better turbo.
Thread
Thread Starter
Forum
Replies
Last Post