2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Passenger Window Question (It gets Stuck)

Thread Tools
 
Search this Thread
 
Old Apr 18, 2002 | 01:22 PM
  #1  
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 336
Likes: 0
From: Atlanta,Ga
Passenger Window Question (It gets Stuck)

i have a question about my passenger power window i can it goes down fine but when i try to get it to come up it kinda gets stuck and i have to wiggle it back and fourth before it comes up all the way any suggestion on how to fix this!
Reply
Old Apr 18, 2002 | 01:28 PM
  #2  
RETed's Avatar
Lives on the Forum
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 26,664
Likes: 22
From: n
You need to readjust the alignment...

You need to pull the door skin (and plastic shield) off the door and lower the window a little so ou can adjust the window "tilt" back to front.&nbsp THe tilt alignment is controlled by two (12mm?) bolts that are on the bottom/middle edge of the window glass.&nbsp Loosen the two bolts and tilt the window glass as far forward as possible - retighten bolts.&nbsp Check to see if this works with the door skin back on - this is the most tedious part of the job.&nbsp If it binds a little or make little "cracking noises", you'll need to tilt the window glass back a little at a time...

Good luck!



-Ted
Reply
Old Apr 18, 2002 | 01:46 PM
  #3  
MaxRX7's Avatar
hambre y sueño
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 300
Likes: 1
From: 80* >
you can try cleaning it or replacing the regulator (motor).
either way you'll have to remove the door panel.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cam_7779
2nd Generation Specific (1986-1992)
9
Aug 18, 2015 07:48 AM




All times are GMT -5. The time now is 12:04 PM.