2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

passenger window does not work

Thread Tools
 
Search this Thread
 
Old 05-28-15, 12:45 AM
  #1  
Full Member
Thread Starter
 
Devon300zx's Avatar
 
Join Date: Apr 2015
Location: south carolina
Posts: 85
Likes: 0
Received 0 Likes on 0 Posts
passenger window does not work

when i bought my rx7 the window did not work, every now and then my window would move when i pressed the button, it goes down but doesnt want to go up unless there is someone pushing it up and someone is pressing the button. i bought awindow regulator from someone and it didnt work at all, not sure if i bought a broken window regulator or what, what else can cause a window to not want to move up or down?
Old 05-28-15, 04:30 AM
  #2  
Senior Member

 
psyaddict's Avatar
 
Join Date: Oct 2012
Location: Tallinn, Estonia
Posts: 460
Received 4 Likes on 4 Posts
Corroded window switch contacts? Dirt between the glass and window slider?
Does the window open when you put 12v directly to the motor?
Old 05-28-15, 04:49 AM
  #3  
Rotary Enthusiast

iTrader: (1)
 
barkz's Avatar
 
Join Date: Sep 2011
Location: New Hampsha
Posts: 1,261
Likes: 0
Received 1 Like on 1 Post
What he said^^^
Old 06-03-15, 12:22 PM
  #4  
Junior Member
 
nathanb's Avatar
 
Join Date: May 2015
Location: North Carolina
Posts: 33
Likes: 0
Received 0 Likes on 0 Posts
I have the same problem with my 88 vert. I suspect it's just gummed up and removing the crud and lubing the tracks will fix it.

Easier said than done, though. Any advice for removing the door panels and fixing it up?
Old 06-05-15, 02:04 PM
  #5  
Senior Member

iTrader: (6)
 
freq's Avatar
 
Join Date: Jan 2006
Location: Colorado
Posts: 679
Received 2 Likes on 2 Posts
Originally Posted by nathanb
I have the same problem with my 88 vert. I suspect it's just gummed up and removing the crud and lubing the tracks will fix it.

Easier said than done, though. Any advice for removing the door panels and fixing it up?
Check/clean the contacts in the window switch. When removing the door panels, be careful with the plastic tabs that secure the panel to the door. If it's tough to pull out, the cardboard door panel will give way and rip.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bURGRotary87
3rd Generation Specific (1993-2002)
2
08-19-15 03:54 AM
cam_7779
2nd Generation Specific (1986-1992)
9
08-18-15 07:48 AM



Quick Reply: passenger window does not work



All times are GMT -5. The time now is 12:01 PM.