passed smog test today with downpipe and bonez high flow cat
#1
I R SAD PANDA W/O BAW
Thread Starter
passed smog test today with downpipe and bonez high flow cat
Hey everyone I just passed smogged today with a corksport 3inch downpipe and bonez high flow main cat replacement and the stock catback. I can finally register my car now.
Here are the results
RPM: 782
co2=13.9 /o2 1.6/HC=19/ co=0
RPM: 2585
co2= 11.2/ o2 = 5.4/ HC = 8/ co= 0
The max allowed HC was 120 and the average was 29 at idle.
The max allowed HC at my RPM was 140 and the average was 20.
Max for co at both idle and certain RPM were both 0 and both averages were 0.1.
Just thought I would share with everyone.
Here are the results
RPM: 782
co2=13.9 /o2 1.6/HC=19/ co=0
RPM: 2585
co2= 11.2/ o2 = 5.4/ HC = 8/ co= 0
The max allowed HC was 120 and the average was 29 at idle.
The max allowed HC at my RPM was 140 and the average was 20.
Max for co at both idle and certain RPM were both 0 and both averages were 0.1.
Just thought I would share with everyone.
#3
Rotary Freak
Join Date: Sep 2003
Location: Wake Forest, NC
Posts: 2,021
Likes: 0
Received 0 Likes
on
0 Posts
EMISSIONS TESTING
Congratulations!
I have an Black 89 GTU, I've just had the engine rebuilt and street ported. I also added a Bonez cat and a racing beat dual exhaust. The car has 109K original miles and it did not pass its first state inspection. Max HC is 220 ppm and CO max is 120 ppm. My car registered 992 HC and 220 on the CO reading! It is also showing a steady engine check light after it is warmed up and running for about 10 minutes. I can't get it to show any ECU codes so I am taking it to a local performance shop who says they can retreive the codes for me.
Can you, or anyone, give me any pointers on what I should be looking for? What did you have to do to get your 7II to pass emissions test?
I have 30 days to get it in compliance in North Carolina.
I have an Black 89 GTU, I've just had the engine rebuilt and street ported. I also added a Bonez cat and a racing beat dual exhaust. The car has 109K original miles and it did not pass its first state inspection. Max HC is 220 ppm and CO max is 120 ppm. My car registered 992 HC and 220 on the CO reading! It is also showing a steady engine check light after it is warmed up and running for about 10 minutes. I can't get it to show any ECU codes so I am taking it to a local performance shop who says they can retreive the codes for me.
Can you, or anyone, give me any pointers on what I should be looking for? What did you have to do to get your 7II to pass emissions test?
I have 30 days to get it in compliance in North Carolina.
#5
I R SAD PANDA W/O BAW
Thread Starter
http://rx7.com/cgi-local/2catalog.cgi?cat=4&part=120
I got the main cat replacement which is the same for turbo and NA and didnt get the turboflo system because I do not have the stock connecting pipe.
The flange is 2.5" so it will bolt up to the stock connecting pipe and pretty much any aftermarket catback. I got the 3" corksport downpipe that replaces the pre cat and stock connecting pipe. Fits perfectly.
I got the main cat replacement which is the same for turbo and NA and didnt get the turboflo system because I do not have the stock connecting pipe.
The flange is 2.5" so it will bolt up to the stock connecting pipe and pretty much any aftermarket catback. I got the 3" corksport downpipe that replaces the pre cat and stock connecting pipe. Fits perfectly.
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM